Previous slide
Next slide
Micet craft’s 10bbl brewhouse is an automated brewing system with a production scale. It can help you complete the commercial brewing business of beer. If you plan to open a large brewery, microbrewery, or commercial brewery, 10bbl Brewhouse will be the most suitable equipment for you. We can provide a variety of container configurations for this brewery equipment. Of course, you can choose the heating method. We offer electric heating, steam heating, and direct flame heating. Micet craft can provide customized turnkey solutions.
10BBL Brewhouse Specification
- Effective volume: 10BBL
- Total volume: 12.5BBL
- Size: 1460*2600mm
- Material: SUS304/SUS316/red Copper
- Heating method: Electric/steam/direct fire heating
- Control system: PLC Simens or PID Schneider/ABB brand
- Heating area: 2.7㎡
- Power: 15-70 Kw depends on the size
- Voltage: 3 phase/380(220, 415,480…)v/50(60)Hz
Single Phase/220(110, 240…)v/50(60)Hz - Brewing batch: 6-12 brew/week
- Work pressure: inner jacket 0.4MPa
cooling jacket 0.5Mpa - Design pressure: inner jacket 0.2MPa
cooling jacket 0.3Mpa - Brewmaster quantity: 1
Note: 1 hl=100liter; 1 Gallon=3.7854 liter; 1 Barrel(BBL) =117Liter
10BBL Brewhouse Standard Configuration
- 2, 3, or 4 vessel systems available
- All piping is TRC fitted, including every elbow, tee, and curve in the system; allows for a 100% sanitary system
- Constructed of 304 or 316 stainless steel
- All pumps in the brewhouse include 100% stainless steel pumps AND motors
- Rake System have both non-lifting and hydraulic lifting optional
- Floor mounted, vessel or ceiling mounted grist cases available
- Flat bottom or conical bottom lauter tun
10BBL Brewhouse Optional Configuration
- Automation systems
- Complete Grain Mill System
- Various Stainless Steel Finishes
- Our standard beer brewing system comes with a 2B mill finish; other finishes are available including:Polished/Brushed/Mirror finish/Pickling passivationCopper Clad and/Copper accented
10BBL Brewhouse Advantages
- The Mash tank is equipped with a clamped level gauge for easy observation. All the lauter tun use milled sieve plates, which have higher filtration accuracy and better effect.
- The grains outdoor of lauter tun is equipped with a dustpan, which is convenient for grains out and cleaning. The drain outlet is separated from the discharge outlet, which is convenient for customers to discharge directly.
- According to the customer’s brewing process, the mash system can not only meet the feeding in the boiling kettle but also meet the feeding in the lauter tun.
- Our mash system can realize both natural filtration and pumping filtration. The lauter tun stirring motor is equipped with a frequency converter, which can realize the step-less speed regulation. The rake motor can also be designed up and down to lift the rake.
- To avoid too much water vapor in the mashing area, the kettle is equipped with an indoor exhaust device or outdoor exhaust device depends on customer needs.
- Equipping with a special inline hop filter to make the wort clearer before fermenting.
- The pump motor uses ABB or JLEM American brand, long service life, and low sound.
- The mash tun is equipped with a grist hydrator to ensure uniform malt moistening.
- The brewhouse piping design is equipped with a cold and hot water mixing device, thermometer, and flow meter, which can evenly mix the cold and hot water before mashing.
- The bottom of lauter tun is equipped with a wort collection loop and an under-the-flush device.
- Equipping with wort balance tank to check the clarity of wort and protect the sieve plate.
- Equipping with sparge arm and double CIP cleaning loop on top of the tank.
- Milling sieve plate, wedge-shaped gap 0.7mm, 4mm thickness, can be disassembled and cleaned, and the bottom is supported and fixed.
- The HLT was designed with a return port, CIP cleaning port, and water inlet, which can realize the recovery and utilization of hot water between the heat exchanger.
- The working platform adopts water leakage and a non-slip design.
- Brewhouse manways always use full glass manway.
10BBL Brewhouse Details
Get 10BBL Brewhouse price
Micet Craft is the ideal partner to realize the dream of brewing. Whether you buy your first brewery, expand or upgrade, we will provide you with customized brewing solutions. Our engineers will provide you with comprehensive technical support and prices within 24 hours of receiving your information. Contact us for the 10BBL Brewhouse price. Micet Craft looks forward to cooperating with you!