Insist on craftsman spirit to fabricate high-quality brewing systems
Search
Close this search box.

Email

sales@micetbrewing.com

Telephone

+86-531-82979225

WhatsApp

+86 18615260186
Previous slide
Next slide

Micet Craft’s 5BBL Brewhouse is a very good small and medium-sized brewing system. This equipment has strong flexibility and diversity, allowing you to start from a micro beer or nano beer business. This 5BBL Brewhouse can be easily expanded according to needs. It is an ideal brewing system for beginners, restaurant owners, and winemakers. Our 5BBL brewing system has the characteristics of simple and convenient operation. It will undergo many stress tests before leaving the factory and will be shipped only after the tests pass. This ensures that there will be no unnecessary troubles during brewing.

5BBL Brewhouse Advantages

  1. The Mash tank is equipped with a clamped level gauge for easy observation. All the lauter tun use milled sieve plates, which have higher filtration accuracy and better effect.
  2. The grains outdoor of lauter tun is equipped with a dustpan, which is convenient for grains out and cleaning. The drain outlet is separated from the discharge outlet, which is convenient for customers to discharge directly.
  3. According to the customer’s brewing process, the mash system can not only meet the feeding in the boiling kettle but also meet the feeding in the lauter tun.
  4. Our mash system can realize both natural filtration and pumping filtration. The lauter tun stirring motor is equipped with a frequency converter, which can realize the step-less speed regulation. The rake motor can also be designed up and down to lift the rake.
  5. To avoid too much water vapor in the mashing area, the kettle is equipped with an indoor exhaust device or outdoor exhaust device depends on customer needs.
  6. Equipping with a special inline hop filter to make the wort clearer before fermenting.
  7. The pump motor uses ABB or JLEM American brand, long service life, and low sound.
  8. The mash tun is equipped with a grist hydrator to ensure uniform malt moistening.
  9. The brewhouse piping design is equipped with a cold and hot water mixing device, thermometer, and flow meter, which can evenly mix the cold and hot water before mashing.
  10. The bottom of lauter tun is equipped with a wort collection loop and an under-the-flush device.
  11. Equipping with wort balance tank to check the clarity of wort and protect the sieve plate.
  12. Equipping with sparge arm and double CIP cleaning loop on top of the tank.
  13. Milling sieve plate, wedge-shaped gap 0.7mm, 4mm thickness, can be disassembled and cleaned, and the bottom is supported and fixed.
  14. The HLT was designed with a return port, CIP cleaning port, and water inlet, which can realize the recovery and utilization of hot water between the heat exchanger.
  15. The working platform adopts water leakage and a non-slip design.
  16. Brewhouse manways always use full glass manway.

5BBL Brewhouse Standard Configuration

  • 2, 3, or 4 vessel systems available
  • All piping is TRC fitted, including every elbow, tee, and curve in the system; allows for a 100% sanitary system
  • Constructed of 304 or 316 stainless steel
  • All pumps in the brewhouse include 100% stainless steel pumps AND motors
  • Rake System have both non-lifting and hydraulic lifting optional
  • Floor mounted, vessel or ceiling mounted grist cases available
  • Flat bottom or conical bottom lauter tun

5BBL Brewhouse Optional Configuration

  • Automation systems
  • Complete Grain Mill System
  • Various Stainless Steel Finishes
  • Our standard beer brewing system comes with a 2B mill finish; other finishes are available including:
    Polished/Brushed/Mirror finish/Pickling passivation
    Copper Clad and/Copper accented

5BBL Brewhouse Specification

  • Effective volume: 5BBL
  • Total volume: 6BBL
  • Size: 1160*2500mm
  • Material: SUS304/SUS316/red Copper
  • Heating method: Electric/steam/direct fire heating
  • Control system: PLC Simens or PID Schneider/ABB brand
  • Heating area: 1.7㎡
  • Power: 15-70 Kw depends on the size
  • Voltage: 3 phase/380(220, 415,480…)v/50(60)Hz
    Single Phase/220(110, 240…)v/50(60)Hz
  • Brewing batch: 6-12 brew/week
  • Work pressure: inner jacket 0.4MPa
    cooling jacket 0.5Mpa
  • Design pressure: inner jacket 0.2MPa
    cooling jacket 0.3Mpa
  • Brewmaster quantity: 1

         Note: 1 hl=100liter; 1 Gallon=3.7854 liter; 1 Barrel(BBL) =117Liter

5BBL Brewhouse Details

5BBL Brewhouse Details-2
5BBL Brewhouse Details-3
2 Vessel Brewing System Details-3
5BBL Brewhouse Details-5
5BBL Brewhouse Details-6
5BBL Brewhouse Details-7
5BBL Brewhouse Details-8

Get 5BBL Brewhouse price

If you want to know more about the brewing system, you can contact us at any time. Micet Craft can provide you with customized product solutions. Of course, we will also provide you with the latest product prices. We look forward to working with you!

Contact Micet Craft

We will contact you within 1 working day, please pay attention to the email with the suffix “@micetbrewing.com”. 

Wait! .......

Ready to start your brewery business?

We’re the experts in beer brewing equipment, offering tailored solutions for your needs. Whether you’re opening a new brewery or upgrading existing equipment, we’ve got you covered.

Here’s what you’ll get when you choose us:

  1. Custom Solutions

    :

    Our team of engineers will design equipment to fit your exact specifications, ensuring it’s a perfect match for your business.

  2. Special Offer

    :

    As a thank you for choosing us, we’re offering exclusive deals for new customers. Contact us now to learn more!

  3. Expert Advice

    :

    With over 16 years of industry experience, we’ll provide you with professional guidance to help you launch or expand your brewery business smoothly.

Note: Your email information will be kept strictly confidential.