The brewhouse combination is 2 vessels with Mash/Lauter tun+Kettle/Whirlpool tank, usually used to brew 1-2 batches a day. It is equipped with two fermenters and can produce about 8bbl of Lager or 12bbl of Ale per month. Suitable for bars, home breweries, and restaurants.

500L whole set brewing equipment is ready to Georgia, gas heated, including two vessel brewhouse, 4*500L+1*1000L fermenters.This complete set of brewing equipment uses a gas steam generator, which requires less power and is a heating method favored by many European customers.

The 200L brewing equipment we designed for German customers places the hot water tank under the brewhouse/filtration box, which not only provides sufficient hot water but also saves space. And adding a stirrer and motor to the kettle/whirlpool tank increases the flexibility of the brewing process.

This is a custom-made fermentation tank for a British customer. The 20BBL fermenter leaves enough space for brewing and storing beer. If you want to add some of your own accessories to the fermentation tank, such as temperature and level sensors, digital thermometers, etc., we can reserve ports on the fermentation tank, and you can install the accessories after receiving the fermentation tank. micet can design corresponding equipment for you according to your needs.

Our Filipino customer sent the 200L boiling pot he purchased to our factory, and we added a platform to it. We made chocolate production equipment for him. We also equipped it with equipment such as a 200L cooling tank, a 2000L mixing tank, a 1000L glycol tank, and a chiller, etc.

Also to producing beer brewing equipment and stills, Micet has recently expanded into new areas. The 1200L coconut water brewing equipment customized by customers in the Philippines is equipped with a 1200L hot water tank and a 2000L ice water tank. The following set of equipment is used to produce coconut water, including hot water tanks, coconut water tanks, storage tanks, glycol tanks, chillers and other necessary equipment. If you need to use stainless steel tanks to produce various beverages, you can tell me your requirements and ideas, and we will customize the equipment for you.

The 400L brewing equipment was installed in Guizhou, China. The engineer came to assist with the installation and sent pictures. It has been used and brewed delicious beer and the customers are very satisfied. The 400L beer brewing equipment belongs to a small brewery and is equipped with 12 fermentation tanks, which can accommodate more batches of beer. Micet specializes in the production of large, medium and small craft beer equipment, fruit wine equipment, beer experimental equipment, and manufacturers that provide brewing technical support.

The beer equipment ordered by the customer was relatively large and was designed and laid out according to his requirements. The customer expressed satisfaction and sent photos. At any reasonable request, Micet can design and produce the brewing system you want according to your requirements to meet your brewing needs.

Customized 10 10BBL fermenters for a Mexican customer. We increased the cone angle and diameter of the fermenter and lowered its height. This not only accommodates the lower room height, but also allows the fermenter to be transported standing up in the container to save shipping costs.The customer is very satisfied and micet supports customized services and technical support.

A Canadian customer customized a batch of 10bbl fermentation tanks and bright tanks. Each tank is equipped with a corresponding valve on the front. Made of 304 stainless steel, it is smooth, durable and not easy to rust. And each tank is equipped with a side manhole to facilitate inspection and cleaning of the tank.