Insista en el espíritu artesano para fabricar sistemas de elaboración de cerveza de alta calidad

Email

sales@micetbrewing.com

Teléfono

+86-531-82979225

WhatsApp

+86 18615260186

Daily maintenance of chiller in craft beer equipment

Mantenimiento diario del enfriador en el equipo de cerveza artesanal

Craft beer equipment requires a lot of cooling in the brewhouse and fermentation process to meet the needs of the process. The brewhouse process is to cool the wort to the temperature required for yeast reproduction. The main purpose of the fermentation process is to keep the temperature in the tank constant, and use ethylene glycol water or alcohol aqueous solution (hereinafter referred to as refrigerant) to take away the temperature generated by the yeast’s decomposition of wort, so that the internal environment in which the yeast survives is stable.

Table Of Contents

working principle

After absorbing the heat, the refrigerant circulates back to the heat exchanger in the refrigerator to exchange heat with Freon. The low-temperature and low-pressure Freon vapor absorbs the heat brought back by the refrigerant and becomes a high-temperature and high-pressure gas.

After volume compression by the compressor, it becomes high-temperature and high-pressure Freon gas. Then the heat is exchanged with the air through the condenser and the fan, and it becomes a Freon liquid at normal temperature and high pressure. Through the throttling effect of the expansion valve, it is sprayed into the heat exchanger of the refrigerator, and can cool the refrigerant. Such a cycle is the working principle of the refrigerator we use.

Precautions

Precautions

Since the heat dissipation of the air-cooled chiller is completed by circulating with the outside air, the temperature, the humidity of the outside air, and floating objects in the air all have an impact on the cooling effect.
For the above three situations, pay attention during installation and use:
  1. Temperature: This should be paid attention to when choosing the installation location. Try to install the unit in a cool and ventilated place behind the house. Because it is drawn upwards, a ventilation distance of 40cm should be left around the unit, so that the large temperature difference and smooth ventilation can increase the unit size. energy efficiency ratio.
  2. Humidity: Air with high humidity cools down better than dry air.
  3. Floating objects: Poplar catkins, catkins, hair, dust, etc. are adsorbed to the surface of the condenser by the fan, and thicken. It will reduce the circulation effect of the air and increase the burden on the compressor. The energy consumption increases and the refrigeration effect becomes worse, and even the compressor is burned out when the current increases. Thus, it is necessary to clean up the attachments on the surface of the condenser in time.

Focus on the temperature

Also, like household air conditioners, some Freon should be added every year. When the chiller is in use, we should also pay attention to the change in the cooling effect, which is reflected in the high and low-pressure gauge of the unit. When the unit is running, the value of the pointer of the high-pressure gauge will reflect the current pressure and temperature. The temperature should be 5-10°C higher than the ambient temperature. If the temperature difference is found to be lower than this range, it means that the current cooling effect is poor, and there may be a lack of Freon.
After understanding the working principle and precautions of the air-cooled chiller, you will also understand the daily maintenance. You should pay more attention to eliminating some small problems so as not to accumulate and cause major failures. I hope this article will be helpful to everyone!
10bbl conical fermenter
Tanque de fermentación

China stainless steel fermentation vessels manufacturer The fermentation tank is where the beer carry out the fermentation process, it provides a place suitable for life

Read More »
10bbl conical fermenter
Tanque de fermentación

China stainless steel fermentation vessels manufacturer The fermentation tank is where the beer carry out the fermentation process, it provides a place suitable for life

Read More »
Get a turnkey solution for brewery equipment
If you plan to open or expand the brewery, you can contact Micet Craft directly. Our engineers will design and manufacture brewery equipment according to your brewing process. Of course, we will also provide you with a complete turnkey solution. Also, if you plan to expand the brewery, we will provide you with customized solutions.

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Contact Micet Craft

We will contact you within 1 working day, please pay attention to the email with the suffix “@micetbrewing.com”. 

Póngase en contacto con Micet Craft

Nos pondremos en contacto con usted en el plazo de 1 día laborable, por favor, preste atención al correo electrónico con el sufijo “@micetbrewing.com”.

Wait! .......

Ready to start your brewery business?

We’re the experts in beer brewing equipment, offering tailored solutions for your needs. Whether you’re opening a new brewery or upgrading existing equipment, we’ve got you covered.

Here’s what you’ll get when you choose us:

  1. Custom Solutions

    :

    Our team of engineers will design equipment to fit your exact specifications, ensuring it’s a perfect match for your business.

  2. Special Offer

    :

    As a thank you for choosing us, we’re offering exclusive deals for new customers. Contact us now to learn more!

  3. Expert Advice

    :

    With over 16 years of industry experience, we’ll provide you with professional guidance to help you launch or expand your brewery business smoothly.

Note: Your email information will be kept strictly confidential.